产品中心您现在的位置:首页 > 产品展示 > > 手提式PH仪 > PH-907手提式PH计(PH-907)

手提式PH计(PH-907)

更新时间:2024-03-11

简要描述:

手提式PH计(PH-907) PH-907

  免费咨询:86-0755-27536633

  发邮件给我们:changlilai@126.com

PH-907  portable PH  INSTRUCTION
BASIC CONsuitcase9V battery combination PH sensorbuffer 7.00and4.00 manual
 
一、           Panel instruction
l        ON/OFF : power switch
l        MODE : function switch,
Repeating:PH →MV→ TEMP  every press
l        CALIB  : 7.00 calibration (6.86)
l        SLOP   : 4.00 calibration (9.18、10.01)
l        TEMP   :  temp compensation manually
 
 
二、           Easy to operate
1、Put the sensor in water , Turn the power on ,and LCD display current PH value ,if you need to calibrate , please check the calibration part of the manual. Wait for the reading to stabilize. It needs a few minutes to equalize the temp and all the condition .
2、  Change a ORP sensor if you want to measure ORP in a solution ,THEN press the MODE key when you’ve changed your sensor。
3、  For Temp compensation , you can easily turn the TEMP knob to the temp in witch the solution is。
 
三、           PH Calibration
1、Put the clean PH sensor into buffer 7.00,a few agitation,wait for the reading to stabilize(suggest at least 5mins),turn CALIB knob to make the value reach 7.00 steadily。Recommend tuning slowly.
2、Wash the sensor with distilled water and wipe it with soft tissue。
3、Put the clean PH sensor into buffer 4.00(or 9 .18), agitate a little,wait for the reading to stabilize(suggest at least 5mins),turn CALIB knob to make the value reach 4.00(or 9.18) steadily。
4、You may repeat the calibration process for 2-3 times for accuracy。
 
NOTE:1、When calibrate ORP sensor please select the right ORP standard。
              2  pH sensor ‘s Temp range is  0-80℃
              3、PH value is a parameter related to Temp, for accurate measure temp compensation is necessary . 
4、storage for a long time ,such as weeks or months ,the sensor should be cleaned sufficiently。

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
深圳市长利来科技有限公司

深圳市长利来科技有限公司

地址:深圳总部地址:深圳市宝安区松岗街道东方1路84号东鸿京大厦902室

主营产品:工业PH计,在线PH计,工业PH电极,溶氧电极,计量泵,锑电极,工业ORP电极,电导率笔,工业ORP计,中国台湾SUNTEX

© 2024 版权所有:深圳市长利来科技有限公司  备案号:粤ICP备09007999号-9  总访问量:427284  站点地图  技术支持:化工仪器网  管理登陆